Konichiwa.

Hours of Operation: Mon - Fri 8:00am - 8:00pm

WELCOME TO MY OFFICIAL WEBSITE

EXTREME CHEMISTRY

ABOUT

I am a skilled Pharmacist. I do my own work. I am a skilled Clinical Chemist. I work alone.

  • The Hunt for Blue Sea
  • The Hunt for Blue Sky
  • The Hunt for Blue Space
  • Graphene Theory
  • Graphene Theory: The Website

FUSION

Fusion is technology first pioneered by Marconi. Then Nicola Tesla. It is Power Over the Air. “It involves transmitting power over certain frequencies and using that power nearby.” according tin Nicola Tesla. “It means free electricity.” he said. This is not what I want. Said Salomon (me). I want to use solar power in the radio spectrum. Clearing the radio spectrum at the solar and star radio radiation spectrum is not more than free solar power from space. To use Fusion requires Graphene which I pioneered at the University of South Florida in 1992. To use requires 5 layers of G6. A thin layer of 1 millimeter Silver (not silver nitrate) attached to two sets of Graphene bilayer spontaneously absorbs energy. In a complete circuit there is draw. A small size antenna of 1 cm x 7 cm in a standard L shape provides USB 1.0a power continuously. A larger size of 1.7 feet x 3.1 to 3.5 feet in an equidistant L shape produces USB 3.0a power continuously. For the first antenna the leads must be 1 inch apart. The lead on the Graphene side is directly in the area middle. For the second larger antenna the leads are 3 feet apart. The lead on the Graphene side is directly in the diameter middle. The second lead can be any size or shape effective antenna.

TUNED

An alloy of 50%:25% Manganese:Silver as the antenna layer instead of Silver will tune to 5000hz. It is at this frequency that a Fusion device will absorb energy at USB 1.0a settings for 2cm x 3cm or 1cm x 7cm in an L shape that is standard. The antenna layer is 1mm attached directly to 1 to 6 layers of Graphene G6. Here the lead is on the diameter center not middle. Graphene side only. The other lead is at least 5 miles away.


An alloy of 50%:25% Molybdenum:Silver as the antenna layer instead of Silver will tune to 16700hz. It is at this frequency that a Fusion device will absorb energy at USB2.5 settings for 7cm x 5cm in an L shape that is standard. The antenna layer is 1mm attached directly to 3 to 7 layers of Graphene G6. Here the lead is on the diameter center. Graphene side or Silver side. The other lead is at least 5 miles away.

FURTHER EVIDENT EXPERIENCE

This section has further information on using Fusion solar panel technology. The graphene must be layer 2 to 3. Layer 1 can be up to 0.01 mm thick. Cover with acrylic if you want.

Titanium Antenna Layer

Titanium 25%, Aluminum 50%, Copper 25% makes an antenna at 1100 hz to 1231 hz only. Use to absorb those frequencies with permission from their owners or leasee.

Molybdenum Antenna Layer

This is a flexible antenna. 25% Molybdenum, Aluminum 75% makes an antenna for 11 hz to 12 mhz only. Using 12.5% Aluminum, 11.5% Copper, 15.5% Molybdenum, and remainder steel 5% Coopersmithe Steeler Steel. You get 1.1hz to 1.2hz only up to 1.2mhz maximum. If you use “remainder” ordinary Iron you get 1.1hz to 12mhz maximum. These last frequencies are in the junk spectra.


By me, Salomon Eli Farin, pharm.D, BCC, etc.

BLOG

ALUMINUM ANTENNAS

Working with bilayer graphene is not easy. Be aware that Fusion can happen with solar absorption using up to 1nm of Graphene. It will spontaneously absorb power from the area.…

ADVERTISEMENTS

Provide us with financial assistance to run this site.

HIRE US

Contact us to hire us. See below.